Surface Treatments

Anodising typically works with Aluminium, Titanium and Anodising Magnesium. It is a process that thickens the natural oxide layer on a metal part’s surface into an anodic oxide film.

Conversion coatings are primarily used to reduce the corrosion effect on aluminium. They also form an ideal surface for paints to bond to & can be used in the painted or un-painted condition.

Dry film lubricant solutions are comprised of very small particles of lubricating agents mixed with a binding resin. The coating is then cured to bond the surface to the substrate.

With 11 paint spray booths across in all 3 sites, a variety of pre-treatment and masking techniques and dedicated curing ovens, Poeton Industries can provide a comprehensive painting services.

Plating is a manufacturing process in which a thin layer of metal is deposited on a substrate, typically a metal or composite. This can be achieved through electroplating.

Non-destructive testing (NDT) is a wide range of inspection processes that test for material flaws and defects without damaging or altering the parts.

State of the art thermal spraying equipment, plasma spraying, encompassing wire, electric arc, and high-energy processes.

We’ll work with you and use our research & development team to design the solution for your requirements.

Our coatings address various problems and performance and durability.

Almost every material can benefit from surface treatments, enhancing performance.