Poeton Coating Selection for bronze, brass or copper parts


	Coating Selection for bronze, brass or copper parts

Copper-based substrates will provide relatively low load-carrying capacity. The main surface engineering options to reduce wear are:

Electroless Nickel and Composites for corrosive wear situations. Hardening at 400^oC will provide additional wear resistance. Ceramic-filled electroless nickel will give further wear resistance. PTFE-filled electroless nickel will give low friction, but high wear if the load is high
Hard Chrome Plate for excellent wear prevention. Choose the thickness on the basis of the load
Thermally Sprayed Metals or Alloys for wear and corrosion. E.g. tool steels
Thermally Sprayed Ceramics or Cermets for maximum wear resistance. E.g. WC/Co coatings, alumina, chromium oxide, etc

In some cases, clicking on the coating type will take you to the appropriate Poeton product.

Return to Sliding Contact Page

Core Standard Coatings