Poeton Coating Selection for aluminium or titanium alloy parts


	Coating Selection for aluminium or titanium alloy parts

Electroless Nickel and Composites for corrosive wear situations. Hardening at 300^oC will provide additional wear resistance. Ceramic-filled electroless nickel will give further wear resistance. PTFE-filled electroless nickel will give low friction, but high wear if the load is high
Hard Chrome Plate for excellent wear prevention. Choose the thickness on the basis of the load
Thermally Sprayed Metals or Alloys for wear and corrosion. E.g. tool steels
Thermally Sprayed Ceramics or Cermets for maximum wear resistance. E.g. WC/Co coatings, alumina, chromium oxide, etc
Anodising for wear protection of aluminium alloys. Can be sealed with PTFE for reduced friction. Anodising of titanium produces only a very thin decorative layer
Electro-Ceramic Coating, for wear protection of aluminium, titanium and magnesium alloys
Nitriding or Nitrocarburisng for wear protection of titanium alloys. Requires high temperature processing

In some cases, clicking on the coating type will take you to the appropriate Poeton product.

Return to Sliding Contact Page

Core Standard Coatings